MINI TERAZZO EP260
KLB EP 260 [Terrazzo (mini)]is a solvent-free, ready to use and self-levelling, 2-component epoxy resin free-flow material for producing smooth coating finishes. Due to the special additives, the coating has a decorative surface similar to granite.
This high quality decorative finish renders it ideal for supermarkets and for foyers and corridors in industrial buildings.
The hardened coating is suitable for use in commercial and industrial locations in which decorative appearance is important. The system is also ideal for areas of heavy use such as packing areas and it is ideal for use where fork lifts are in operation.
Because of the make up of the system, the high quality finishes are achieved without the traditional grinding.
Available in four standard shades and cured sample are available on request.
‘Comfort Floor (resin)’ – Ultra Violet Resistant is a high-quality, self-flow coating based on liquid, 2-component polyurethane resin. PU 410 is used to produce flexible floor coatings primarily in interior locations.
The system exhibits excellent hard wearing, flexibility, and sound proofing qualities and is ideal in the following areas or applications:
- Shopping Centres
- Play Areas
- Healthcare Facilities
- Exhibition Areas and Showrooms
It is also beneficial in multi story buildings where it contributes to noise reduction between floors.
Its use in work areas where staff need to spend prolonged periods on their feet results in less stress and strain on legs and feet.
The system’s flexibility makes it ideal for use in crack bridging in suspended floors.
Unlike the usual, industrial polyurethane coatings, PU 410 is made from light-fast raw materials and can be produced in light, decorative colours as the finished coating has excellent colour stability.
Cured samples are available on request.
KLB-SYSTEM EPOXID EP 200 VF
KLB-SYSTEM EPOXID EP 200 VF is a solvent-free, pigmented, self-flow coating based on 2-component epoxy resin with excellent flow- and smoothing- properties. Due to its good flow performance, coatings can be applied from 1.5 mm up to any desired thickness according to demand and with due regard to wear factors.
EP 200 VF is made from high-quality resin components with high binder content. Best economy can be obtained by addition of quartz sand, especially when working with greater thicknesses. The product is easy to use and gives a first-class appearance. The hardened coating is suitable for use in commercial and industrial areas. EP 200 VF will accommodate some deflection and, as with all epoxy resin coatings, has excellent wear resistance. As an epoxy resin coating, EP 200 VF has good resistance to yellowing and is, therefore, suitable for use in light colours. EP 200 VF has good chemical resistance, e.g. against alkalis, oils, grease, solvents, water salt solutions and various acids. If particular resistance properties are required, please obtain advice.
KLB EP 213
KLB-System EPOXID EP 213 is a self-levelling, solvent free, 2-component, epoxy-resin coating for a hard and smooth surface finish as well as mixed or scatter-coat finishes, ideally for use in industrial locations. The material has excellent flow, smoothing and setting properties EP 213 can be mixed with quartz sand, which is both beneficial and economical for thickness above 3 mm. EP 213, for a standard coating product, has excellent resistance to chemicals.
RESIN FLOORS WITH ZERO PORES FOR CLEAN AREAS.KLB MINI-TERRAZZO IS TESTED AND BEST IN CLASS.
KLB ANTI BAK SYSTEMS
SPECIAL TRIAL OFFER.
SCREED AREAS,LESS THAN 100M.SQ.,OF ANTI BACTERIAL SYSTEM ON ORDERS IN JANUARY AND FEBRUARY.
ASK FOR BROCHURE AND TEST RESULTS.TEL 01-4570868.