KLB PRODUCTS

KLB-SYSTEM EPOXY EP 280 WHG and EP 282 WHG

Chemically resistant 2-C-Epoxy-Resin-Coatings with technical approval for water protection

KLB-SYSTEM EPOXY EP 280 WHG and EP 282 WHG are solvent-free, crack-bridging 2-Component-Epoxy-Resin free-flow coatings with very good chemical resistance. KLB-SYSTEM EPOXY EP 280 WHG and EP 282 WHG have been tested in regard to the WHG* § 63-requirements and have been accredited by the DIBt**. The coating is suitable for collection-rooms and -trays, like HBV*- and LAU*-equipment, which have been tested according to the Water Household Law. KLB-SYSTEM EPOXY EP 280 WHG is electrically conductive and suitable for areas with explosion proof requirements. Both coatings are elastic and offer good chemical resistance. According to DIBt**- principles both coatings are resistant to many tested chemicals Please note the classification of operation type with the comprehensive accreditations and test reports.

Application Area:
- Coating of collection-rooms and -trays in
regard to the WHG*-requirements and
technical approval
- Industrial flooring with traffic in regard to
the WHG*-requirements
- Electrically conductive and chemically
resistant industrial flooring

Build-up of SystemLayer in Detail
Conductive Coating Non-conductive Coating (Standard)
Lamination strength 2 – 3 mm 2 – 3 mm
Coating KLB-SYSTEM EPOXY EP 280 WHG KLB-SYSTEM EPOXY EP 282 WHG
Conductive Coat Install grounding system with copper bands on 1 - 2 spots for each 100 m².
and Grounding Apply the conductive coat KLB-SYSTEM EPOXY EP 799 Conductive Coat.
Scratch Coat KLB-SYSTEM EPOXY EP 55 KLB-SYSTEM EPOXY EP 55
mixed with KLB-Sand Blend 2/1 mixed with KLB-Sand Blend 2/1
Base Coat KLB-SYSTEM EPOXY EP 55 KLB-SYSTEM EPOXY EP 55
Substrate Requirements to the substrate according to the BEB-worksheets
and our detailed base coat instructions or advice by our technicians.

System Variant
Layer in Detail
Increasing the To slightly increase the slip resistance grade scatter with silicum carbide.
Slip-Resistance Grade
Matting For a matt surface additionally apply KLB-SYSTEM POLYURETHANE PU 881 EL+.
Alternative Coatings Conductive:
Standard: KLB-SYSTEM EPOXY EP 200 EL+
For ESD-requirements: KLB-SYSTEM EPOXY EP 211 ESD, EP 212 ESD or EP 200 EL+
combined with PU 881 EL+
Elastic: KLB-SYSTEM POLYURETHANE PU 413 EL+
Steam-permeable: KLB-SYSTEM EPOXY EP 785 EL+ or EP 790 EL+
Commercially and industrially used coatings can be produced as follows

KLB-SYSTEM PU-CONCRETE

Industrial flooring for wet areas - resistant to hot water and chemicals

KLB PU-CONCRETE-Coatings are high quality, 3-Component-Polyurethane-Mortar- Coatings for floors with high load. In comparison to other synthetic resin coatings, PU-CONCRETE features much better temperature resistance. That’s the reason why they are applied already for many years where floors get strained very often with water, hot water, high temperatures and chemicals. Used in the food production and food processing industry as well as the beverage and chemical industry and many other areas. Comparing to many common synthetic resin coatings which capitulate at temperatures of 60 °C / 140 °F, KLB PU-CONCRETE features a considerably higher glass transition temperature. An excellent temperature stability is achieved: up to 130 °C / 266 °F for humid heat and up to 150 °C / 302 °F for dry heat. This is what makes KLB PU-CONCRETE perfect for high fluctuations in temperature and hot water. KLB PU-CONCRETE also allows the usage of vapour jet cleaning equipment. To select the perfect KLB PU-CONCRETE-Flooring for your individual needs in industrial or trading business different system components and products as well as layers from 6 mm up to 9 mm are available. Since the coating is made out of one casting it offers good mechanical resistance. KLB-SYSTEM PU-CONCRETE is also available in an electrically conductive adjustment: PUCONCRETE 4006 EL+.

Application Area:
- Breweries, vinification industry,
beverage industry
- Slaughterhouses and butcheries
- Food industry, backeries
- Creamery / dairy farming
- Chemical industry, pharmaceutical industry
and many more

Build-up of System
Layer in Detail
R10 R12 (slip-resistant)
Lamination Strength 8 – 10 mm 8 – 10 mm
Top Coat KLB-SYSTEM PU-CONCRETE 4010 Grip KLB-SYSTEM PU-CONCRETE 4080
as Top Sealer
Prime Coat KLB-SYSTEM PU-CONCRETE 4009
and Scattering scattered with Corundum 0.5/1.0 mm
Scratch Coat Optional for increased depth of roughness with KLB-SYSTEM PU-CONCRETE 4006
Base Coat KLB-SYSTEM PU-CONCRETE 4050 Base Coat
Substrate Requirements to the substrate according to the BEB-worksheets and our detailed base coat
instructions or advice by our technicians. Important: watch for tensile strength and compression
proof substrate as well as anchoring cuts according to the requirements.

System Variant
Layer in Detail
Slip Resistance Class R9 – R13 can be achieved by scattering with sand or corundum.
Colour 4 different colours are available
Alternative Coatings For layers 6 mm: KLB-SYSTEM PU-CONCRETE 4006
Conductive adjustment: KLB-SYSTEM PU-CONCRETE 4006 EL+

Pages