KLB-SYSTEM POLYURETHANE PU 410

High-quality, uv-stable 2-Component-Polyurethane-Coating for decorative living and recreation rooms.

KLB-SYSTEM POLYURETHANE PU 410 is a high-quality, free-flow coating, based on a liquid 2-Component-Polyurethane-Resin. KLBSYSTEM POLYURETHANE PU 410 is suitable for flexible coatings, predominantly for interior areas with impact sound insulation and decorative features. On the contraire to known polyurethane industrial coatings KLB-SYSTEM POLYURETHANE PU 410 is made from uv-stable raw materials and is colour-stable. The coating has good free-flow and smoothing properties and cures with almost no shrinkage. The cured coating shows good flexibility and is crack bridging starting at layers of 2 mm. KLB-SYSTEM POLYURETHANE PU 410 is suitable for interior areas requiring more flexibility due to the substrate.
Increased comfort can be achieved by incorporating a bedding layer. KLB-SYSTEM POLYURETHANE PU 410 can be produced in 14 standard colours, even in pale special colours.
The coating is very suitable for partiColor®-Chips scattering.
Use always in combination with KLBSYSTEM POLYURETHANE PU 805 E – matt and low-emission sealer.

Application Area:
- Especially for decorative living-, recreationand
adjoining rooms, like e. g. show-rooms,
sales-room, offices, hospitals, conferenceand
training classrooms, nurseries, schools
and many more
- Also suitable for exterior areas – please contact
our technical department!

Build-up of System
Layer in Detail
Lamination strength 1 – 2.5 mm
Sealer KLB-SYSTEM POLYURETHANE PU 805 E
Coating KLB-SYSTEM POLYURETHANE PU 410
Scratch Coat KLB-SYSTEM EPOXY EP 55 blended with KLB-Sand Blend 2/1
Base Coat KLB-SYSTEM EPOXY EP 55
Substrate Requirements to the substrate according to the BEB-worksheets
and our detailed base coat instructions or advice by our technicians.

System Variant
Layer in Detail
Decorative Scattering Adding partiColor®-Chips and subsequently sealing is suitable for the coloured design.
Apply a matt sealer finish.
Increasing the To slightly increase the slip resistance grade scatter with silicum carbide or a delustering
Slip-Resistance Grade agent or seal with the RHX-additive.
Matting A matt surface can be achieved by additionally sealing with KLB-SYSTEM EPOXY
EP 705 E / EP 706 E or KLB-SYSTEM POLYURETHANE PU 805 E / 806 E.
Alternative Coatings Not colour-stable: KLB-SYSTEM POLYURETHANE PU 420 or PU 421