KLB-SYSTEM EPOXY EP 280 WHG and EP 282 WHG

Chemically resistant 2-C-Epoxy-Resin-Coatings with technical approval for water protection

KLB-SYSTEM EPOXY EP 280 WHG and EP 282 WHG are solvent-free, crack-bridging 2-Component-Epoxy-Resin free-flow coatings with very good chemical resistance. KLB-SYSTEM EPOXY EP 280 WHG and EP 282 WHG have been tested in regard to the WHG* § 63-requirements and have been accredited by the DIBt**. The coating is suitable for collection-rooms and -trays, like HBV*- and LAU*-equipment, which have been tested according to the Water Household Law. KLB-SYSTEM EPOXY EP 280 WHG is electrically conductive and suitable for areas with explosion proof requirements. Both coatings are elastic and offer good chemical resistance. According to DIBt**- principles both coatings are resistant to many tested chemicals Please note the classification of operation type with the comprehensive accreditations and test reports.

Application Area:
- Coating of collection-rooms and -trays in
regard to the WHG*-requirements and
technical approval
- Industrial flooring with traffic in regard to
the WHG*-requirements
- Electrically conductive and chemically
resistant industrial flooring

Build-up of SystemLayer in Detail
Conductive Coating Non-conductive Coating (Standard)
Lamination strength 2 – 3 mm 2 – 3 mm
Coating KLB-SYSTEM EPOXY EP 280 WHG KLB-SYSTEM EPOXY EP 282 WHG
Conductive Coat Install grounding system with copper bands on 1 - 2 spots for each 100 m².
and Grounding Apply the conductive coat KLB-SYSTEM EPOXY EP 799 Conductive Coat.
Scratch Coat KLB-SYSTEM EPOXY EP 55 KLB-SYSTEM EPOXY EP 55
mixed with KLB-Sand Blend 2/1 mixed with KLB-Sand Blend 2/1
Base Coat KLB-SYSTEM EPOXY EP 55 KLB-SYSTEM EPOXY EP 55
Substrate Requirements to the substrate according to the BEB-worksheets
and our detailed base coat instructions or advice by our technicians.

System Variant
Layer in Detail
Increasing the To slightly increase the slip resistance grade scatter with silicum carbide.
Slip-Resistance Grade
Matting For a matt surface additionally apply KLB-SYSTEM POLYURETHANE PU 881 EL+.
Alternative Coatings Conductive:
Standard: KLB-SYSTEM EPOXY EP 200 EL+
For ESD-requirements: KLB-SYSTEM EPOXY EP 211 ESD, EP 212 ESD or EP 200 EL+
combined with PU 881 EL+
Elastic: KLB-SYSTEM POLYURETHANE PU 413 EL+
Steam-permeable: KLB-SYSTEM EPOXY EP 785 EL+ or EP 790 EL+
Commercially and industrially used coatings can be produced as follows