KLB-SYSTEM EPOXY EP 202

Low-emission 2-Component-Epoxy-Resin-Coating, AgBB-tested with the appropriate accreditation, suitable for an “industrial” recreation room.

The high-quality, free-flow coating KLBSYSTEM
EPOXY EP 202 is based on a lowemission and solvent-free 2-Component-
Epoxy-Resin which features very low VOC*- values. Suitable for many areas like private domains, commercially or industrially used areas with a medium to high load. The 3-layer
system offers a smooth surface due to its free flow and planing characteristics.

The floor is very easy to clean and extremely hygienic. The surface can be produced very fast and economical with KLB-SYSTEM EPOXY EP 202 which is also very beneficial for reconstruction. The free-flow coating is available in a great variety and different colours depending on the design and demand. By applying subsequent coatings or adding quartz sand adequate anti-slip grades can be achieved. The cured coating offers resistance to multiple chemicals.

Application Area:
- Especially for residential properties,
recreation- and adjoining rooms where
people remain, e. g. offices, conferenceand
training classrooms, nurseries, schools,
cafeteria, restaurants, show rooms as well
as private residential and recreation areas
- But also for emission-free commercially and
industrially used areas, e. g. production,
laboratories, stock- and consignment areas

Build-up of System
Layer in Detail
Lamination strength 2 – 3 mm
Coating KLB-SYSTEM EPOXY EP 202
Scratch Coat KLB-SYSTEM EPOXY EP 55 blended with KLB-Sand Blend 2/1
Base Coat KLB-SYSTEM EPOXY EP 55
Substrate Requirements to the substrate according to the BEB-worksheets
and our detailed base coat instructions or advice by our technicians.

System Variant
Layer in Detail
Decorative Scattering Adding partiColor®-Chips and subsequently sealing is suitable for the coloured design.
Apply a matt sealer finish.
Increasing the To slightly increase the slip resistance grade scatter with silicum carbide or a delustering
Slip-Resistance Grade agent or seal with the RHX-additive.
Matting A matt surface can be achieved by additionally sealing with KLB-SYSTEM EPOXY
EP 705 E / EP 706 E or KLB-SYSTEM POLYURETHANE PU 805 E / 806 E.
Alternative Coatings Standard: KLB-SYSTEM EPOXY EP 213 or EP 220
Elastic: KLB-SYSTEM POLYURETHANE PU 410 or PU 420
Low-emission coatings can be produced as follows:
and so on